// File: @openzeppelin/contracts/math/SafeMath.sol

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// File: contracts/test/MockToken.sol


pragma solidity 0.7.2;


contract MockToken {

    using SafeMath for uint256;

    event Transfer(
        address indexed _from,
        address indexed _to,
        uint256 _value
    );

    event Approval(
        address indexed _owner,
        address indexed _spender,
        uint256 _value
    );


    uint256 tokenTotalSupply;

    string private tokenName;

    string private tokenSymbol;

    uint8  private tokenDecimals;

    mapping(address => uint256) balances;
    mapping(address => mapping (address => uint256)) allowed;

    constructor(string memory _symbol, string memory _name, uint8 _decimals)
        public
    {
        tokenTotalSupply = 100;

        tokenSymbol = _symbol;
        tokenName = _name;
        tokenDecimals = _decimals;

        mint(msg.sender, tokenTotalSupply);
    }

    function name() external view returns (string memory) {
        return tokenName;
    }

    function symbol() external view returns (string memory) {
        return tokenSymbol;
    }

    function decimals() external view returns (uint8) {
        return tokenDecimals;
    }

    function totalSupply() external view returns (uint256) {
        return tokenTotalSupply;
    }

    function balanceOf(address _owner) external view returns (uint256) {
        return balances[_owner];
    }

    function allowance(address _owner, address _spender)
        external
        view
        returns (uint256 remaining_)
    {
        remaining_ = allowed[_owner][_spender];
    }

    function transfer(address _to, uint256 _value)
        external
        returns (bool success)
    {
        // According to the EIP20 spec, "transfers of 0 values MUST be treated
        // as normal transfers and fire the Transfer event".
        // Also, should throw if not enough balance.
        // This is taken care of by SafeMath.

        balances[msg.sender] = balances[msg.sender].sub(_value);
        balances[_to] = balances[_to].add(_value);

        emit Transfer(msg.sender, _to, _value);

        return true;
    }

    function transferFrom(address _from, address _to, uint256 _value)
        external
        returns (bool success)
    {
        balances[_from] = balances[_from].sub(_value);
        allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
        balances[_to] = balances[_to].add(_value);

        emit Transfer(_from, _to, _value);

        return true;
    }

    function approve(address _spender, uint256 _value)
        external
        returns (bool success)
    {
        allowed[msg.sender][_spender] = _value;

        emit Approval(msg.sender, _spender, _value);

        return true;
    }

    function mint(address _owner, uint256 _value)
        public
    {
        require(
            _owner != address(0),
            "The account to set balance is null."
        );

        balances[_owner] = balances[_owner].add(_value);

        tokenTotalSupply = tokenTotalSupply.add(_value);
    }

    function burn(uint256 amount) external {
        balances[msg.sender] = balances[msg.sender].sub(amount);

        emit Transfer(msg.sender, address(0x00), amount);
    }

}